Cracks and potholes are inevitable when it comes to asphalt pavement; however, neglecting the sealing of your objects in asphalt can lead to accelerated cracking and an uneven situation, which shortens the life of road surfaces.
Dry weather and frosty weather, although freezing temperatures are usually not a big problem here in Florida, can have a negative effect on asphalt pavement. Other environmental problems, such as tree roots, vehicle traffic, gas, oil, sand and trash, also contribute to cracking and damage to asphalt.
There are many advantages to sealing, such as:
- Minimize repairs. Sealing minimizes the need for asphalt repair.
- Insulation – Sealing helps heat the asphalt and prevents climate damage.
- Oxidation Limit – Sealing prevents asphalt from oxidizing.
- Curb appeal: Sealing improves the appearance of asphalt pavement.
- Damage resistance: Sealing helps asphalt to withstand damage caused by gas, oil and salt.
Ask the professionals
Pavement contractors maintain the pavement maintenance load for most commercial properties. They provide a wide range of services, from hacking to repair, repair of potholes and other types of asphalt repair. But one of the most important tasks performed by road paving contractors is sealcoating pittsburgh pa.
With proper and timely application, a sealing layer made on a regular basis, hand in hand with cracking and repairing asphalt, can extend the life of the pavement behind the counter, where the price-performance ratio the additional lifetime of the road surface exceeds the cost of maintenance itself!
Properly sealed and high quality sealed product will protect asphalt from your parking lot from fuel, oil, weather conditions and road wear. If the asphalt is not covered by the seal of the object or if it is not sealed at all, cracks may form on the asphalt, which may form gouges. Depending on the environment, most of the asphalt should be covered with compaction every two or three years.
The cost of sealing asphalt pavement is determined not only by the calculation method based on square meters. There are many variables for determining the cost of the sealing layer, such as: the number of cracks that need to be filled, the potholes that need to be repaired, the number of layers that are needed and how much manual labor is required. Ask your paving contractor to come into your commercial facilities to inspect the area to be covered with a seal and give you a free estimate.